Carbon dioxide instead of oil? A Belgian company turns CO2 into a raw material for industry + test

A young engineer in a white hard hat and a high-visibility vest climbs metal stairs at an industrial plant full of pipes and tanks.

Most products that contain carbon are made from crude oil or natural gas. D-CRBN, a spin-off company of the University of Antwerp, wants to change that: it uses plasma to split carbon dioxide and turn it into carbon monoxide, a valuable building block for industry. See how the technology works and how using CO2 differs from storing it – and at the end take a short test to check how much you remember.

Contents

⇑Where industry gets its carbon

Carbon is the basic building block of an enormous number of chemicals and of the products we use every day. The problem is that the raw materials used to make them usually come from fossil fuels. Gill Scheltjens, project coordinator and CEO of D-CRBN, describes it like this: “All feedstock for generating anything that is carbon-based tends to come from oil or natural gas. This means that these products inherently have a large carbon footprint.”

A carbon footprint is the total amount of greenhouse gases released into the atmosphere in connection with making a product. If the raw material comes from oil or gas right from the start, it is hard to turn it into a truly green product later on. That is why chemists and engineers are looking for other sources of carbon that do not require extracting fossil fuels. One of them could be a gas we have in surplus: carbon dioxide.

⇑A company that grew out of a university

D-CRBN is a climate tech company and a spin-off of the University of Antwerp in Belgium. A spin-off is a company set up to turn the results of university research into a product or service that the economy can use. It is often founded by the very scientists who worked on the technology in the laboratory beforehand.

“The idea for D-CRBN came about from a persistent problem we identified in industry,” explains Scheltjens. The company has developed a technology that converts carbon dioxide into a useful feedstock for a range of chemicals and products. Thanks in part to a European Innovation Council (EIC) Accelerator grant, the EU programme that supports promising technology companies, it has been able to scale up its operations and offer industry a viable business proposition.

⇑Why CO2 is a difficult material

A carbon dioxide molecule is made up of one carbon atom and two oxygen atoms. It is very stable, and the gas itself is inert, which means that it normally does not react with other substances. That is why CO2 from industrial plants is simply emitted into the atmosphere as a greenhouse gas or, at best, stored underground.

The D-CRBN team decided to kill two birds with one stone. The first aim is to replace fossil fuel-based feedstock with carbon dioxide. The second is to turn CO2 into a useful product instead of emitting or burying it. If that succeeds, a gas that is a problem today would become a material for further production.

⇑Plasma splits the molecule

For this task the team developed a plasma-based technique that uses electricity to convert captured CO2 into carbon monoxide (CO). “Plasma is an ionised gas, which is created by putting an electric current through it, in this case CO2,” notes Scheltjens. “When we do this, the CO2 molecule falls apart and is split into its original building block. You get carbon monoxide.”

Plasma is often called the fourth state of matter, alongside solid, liquid and gas. In an ionised gas some of the particles lose electrons, and electrical energy is enough to break bonds that are normally very strong. We meet plasma outside the laboratory too: it glows in neon lights, and in nature it can be seen, for example, in lightning.

Carbon monoxide is a valuable ingredient in the chemical industry and one of its basic intermediate products. Combined with hydrogen, it forms what is known as synthesis gas, from which further chemical compounds, such as methanol, can be made. That is precisely why turning CO2 into CO opens the way to a whole range of products.

Fun fact: the carbon monoxide that D-CRBN makes from carbon dioxide is the gas people know as a silent killer at home. It is dangerous to humans and must be avoided, but in chemical plants it is a valuable building block.

⇑The electricity bill matters too

Every technology meant for factories has to pay its way. The D-CRBN team was confident that the plasma-based process could be economically viable, even during times of high electricity costs. This potential was recognised by the EIC, which selected the D-CRBN project out of thousands of applications to receive a EUR 2.5 million grant.

The grant helped to open the door to a series A investment round, in which the company raised EUR 17.5 million in funding. A series A round is usually the first major round in which investment funds buy shares in a young company. The money is meant to let the company move from successful tests to operating on a larger scale.

⇑The first industrial demonstrator

The next step is the first industrial-scale demonstrator, that is, a plant meant to show that the technology works not only in the laboratory but also in the conditions of a real factory. “We have been able to identify the site of our first industrial-scale demonstrator,” says Scheltjens. “This is an important milestone, as from here we can look to bring our technology further afield.”

Other parts of the world are interested in the solution too. As Scheltjens adds, countries such as China and India have expressed an interest in collaborating with D-CRBN towards green molecules. The company stresses, however, that Europe remains its main focus.

⇑Put it to use or bury it

There is a debate about what to do with carbon dioxide from industry. Two approaches are mentioned most often:

  • CCS (carbon capture and storage) – CO2 is captured from exhaust gases and stored permanently underground, treated as waste;
  • CCU (carbon capture and utilisation) – the captured CO2 becomes a raw material for making new products.

The D-CRBN team is convinced that the second approach is far more innovative and positive than simply capturing and storing CO2 as waste. “What does this mean in reality?” asks Scheltjens. “It means products based on CO2 rather than fossil alternatives and putting CO2 to work rather than simply putting it in the ground. It is creating added value.” With these first successes, the company is determined to show that CCU, rather than CCS, is the smartest way forward for Europe.

⇑Europe wants to be first

Scheltjens and his team believe that their technology will help Europe lead the charge in building a green alternative to manufacturing based on fossil fuels. “Our main focus will always be Europe,” he says. “There are huge opportunities for Europe here but also risks that someone else will come and fill this space. This is why we feel this investment has been so important.”

The company sees this as a benefit not only for the climate but also for the economy. “We turn an emissions liability into an economic opportunity, making carbon recycling a driver of industrial competitiveness for Europe,” says Scheltjens. Carbon recycling means here that the same element, instead of ending up in the atmosphere, returns to circulation as a material for production.

⇑Who is this topic for?

The story of D-CRBN shows that the road from the laboratory to the factory brings together many fields. Knowledge from several degree programmes comes in handy along the way:

  • chemistry and chemical technology – reactions, intermediate products and new raw materials for industry;
  • physics and materials engineering – plasma and the devices that generate it;
  • environmental engineering and energy – emission reduction and the cost of electricity;
  • management and economics – founding technology companies and attracting investors.

⇑In short

D-CRBN, a spin-off of the University of Antwerp, uses plasma to split carbon dioxide and turn it into carbon monoxide, a valuable intermediate product for the chemical industry. Thanks to an EIC grant of EUR 2.5 million and EUR 17.5 million from a series A round, it has identified the site for its first industrial demonstrator. Its team argues that using CO2 as a raw material is a better route for Europe than simply burying it underground.

⇑Five questions: how much do you know about turning CO2 into a raw material? (test)

5 questions · one minute

1. Where do the raw materials for making carbon-based products usually come from?

2. What is D-CRBN?

3. What is produced when D-CRBN passes an electric current through CO2 in the form of plasma?

4. How much was the grant that D-CRBN received from the European Innovation Council?

5. How does CCU differ from CCS?


published: 2026-11-19
Comments
StudentNews Group Websites for students and future students — in Poland since 2007, across Europe since 2014. Over 50 websites and millions of users a year (Google Analytics). Studies in Europe Universities in Europe Bachelor’s Master’s Doctorate MBA Study guide Work abroad Travel For partners Advertising and cooperation Reach (online report) Contact advertising@studentnews.eu © 2003–2026 Grupa StudentNews.pl sp. z o.o., Modlnica, Poland
Privacy Policy