
Satellites in low Earth orbit have to manoeuvre, yet conventional thrusters are often too big and too expensive for small constellations. In May 2025, a European team fired an ionic liquid thruster in orbit for the first time – an electrospray engine that needs less than 200 ml of fuel to run for several years. Read how it works, and at the end take a short test to see how much you remember.
Satellites in low Earth orbit, relatively close to our planet, do not move through a perfect vacuum. Traces of atmosphere constantly slow them down, and the area is filling up with space debris. To keep to their planned trajectory and avoid hazards, satellites must be able to manoeuvre, which means changing their flight path when necessary.
Conventional propulsion systems, however, are often too bulky and too expensive to build at the scale that modern constellations – groups of satellites working together – require. They restrict what satellites can do and shorten their lifespans. This is a growing concern, because small satellite constellations are expanding rapidly to meet increasing demand for communication and Earth observation. Operators therefore need to achieve maximum mobility within tight limits on mass, power and budget.
Emmanuel Plier, coordinator of the EU-funded HYPERION project and COO at ION-X, puts it well: “In the small satellite ecosystem, every gram and every watt counts; we transform these constraints into opportunities through a new electric propulsion technology called ‘electrospray’.” The solution, then, is electric propulsion that needs neither large tanks nor complicated chemistry.
Electrospray is a type of electric propulsion. It applies the principles of electro-hydro-dynamics to a liquid propellant: electrical fields draw fast-moving ions out of it and expel them at high speeds. An ion is an atom or molecule carrying an electric charge. Because the ions fly off in one direction, the satellite is pushed in the opposite one, just as in any rocket engine.
The propellant here is an ionic liquid – a salt that, unlike table salt, is already liquid at low temperatures. The patented technology forms the core of ION-X’s thrusters and optimises simplicity, efficiency and scalability, meaning the ability to produce it in large numbers. The company’s mission is to give satellite operators the best propulsion system, one that extends spacecraft lifespans, boosts manoeuvrability and secures long-term mission success.
In May 2025, the system achieved its first ion beam firing in low Earth orbit. The prototype thruster was onboard a satellite built by Space Inventor and carried into orbit by SpaceX’s Transporter-12 mission. Controlled by its onboard computer and powered by a proprietary power processing unit, it generated an estimated 20 µN of thrust with a 200 µA ion beam at 5 kV.
A micronewton (µN) is one millionth of a newton, so this thrust is very small. An engine like this is not used to take off from Earth but for gentle yet long-lasting corrections to a flight path once in orbit. For a small satellite that is enough: what counts is not the strength of a single push but the sum of many small pushes over time.
Fun fact: when it was first fired in orbit, the ION-X thruster generated an estimated thrust of just 20 µN, with a 200 µA ion beam at 5 kV. Despite such a tiny force, the flight test validated all of the system’s core functions, including real-time telemetry and remote software updates from Earth.
Plier stresses the significance of the moment: “Ten years after BUSEK launched the world-first ionic liquid electrospray system for ESA/NASA LISA Pathfinder in 2015, ION-X’s demonstration marked the second occurrence worldwide – and the first ever by a European company.” LISA Pathfinder was a mission that tested technologies needed for future gravitational wave observatories.
The flight test validated all of the core functions:
It was not entirely trouble-free, though: an anomaly during the flight limited full utilisation of the engine. The team regarded this as a valuable experience, because the lessons strengthened its ground-testing and control processes. For engineers this is a normal part of developing technology, since only a flight shows how a system copes in real conditions.
Central to spacecraft mobility is delta-v – the change in speed that a satellite can still carry out. It is a direct measure of its manoeuvring power. A reliable delta-v budget enables operators to perform precise station-keeping, orbit raising or debris collision avoidance, actively protecting their investments. By preserving orbital positioning and extending lifetime, delta-v translates directly into uninterrupted operational uptime and sustained revenue generation.
The more efficient the thruster, the more delta-v it delivers from the same amount of fuel. Plier says so plainly: “Using less than 200 ml of fuel, our systems can propel a 10- to 100-kg satellite for several years.” Two hundred millilitres is less than a typical glass of water.
The second advantage Plier points to is a “plug-and-play” approach – a thruster that is ready to connect. It is meant to simplify integrating the engine into a satellite without compromising performance. In the world of small satellites, where every gram counts, this matters a great deal.
Plier describes it like this: “The engine starts instantly without any energy-consuming pre-heating. Furthermore, its propellant is non-toxic, inert, non-pressurised and produced locally in France, thereby eliminating complex logistics and regulatory constraints.”
From a satellite operator’s point of view, this means several concrete benefits:
ION-X is moving forward at full speed. Having delivered around 10 new thrusters in 2026, the team is using findings from its first space demonstration to develop a next-generation product. Delivery is targeted for mid-2027, with further flight demonstrations of thrusters with enhanced performance scheduled from 2027 onwards.
This is the typical path of a new space technology: laboratory, flight test, lessons learned and the next version. For fast-growing constellations of small satellites, it is important that such a thruster can be produced in greater numbers, and scalability is meant to be precisely this technology’s strength.
Satellite propulsion brings together physics, electronics, mechanics and materials engineering. It is a field of work for graduates in subjects such as physics, automation and robotics, electronics, mechanical engineering or aerospace engineering. Companies like ION-X also need specialists in control software and testing. It is an area where small teams can genuinely push the boundaries of technology.
Small satellites in low orbit have to manoeuvre within tight limits on mass, power and budget. The HYPERION project enabled ION-X to fire the first European ionic liquid electrospray thruster in orbit in May 2025. Despite an anomaly in flight, the team gathered valuable lessons and is working on a next-generation product planned for mid-2027.
5 questions · one minute