An estimated 2.6 
million people in Europe have mobility problems affecting their upper 
limbs, and around 1.3 million of them require assistive technologies, or
 the help of human carers, to be able to perform everyday tasks. Across 
developed countries, the figure rises to 2.5 million. They include 
people suffering from a range of diseases, including multiple sclerosis 
and amyotrophic lateral sclerosis, as well as varying degrees of 
paralysis, among them locked-in syndrome in which a person may only be 
able to move their eyes.
While many people already make use of assistive technologies -an 
umbrella term that includes assistive, adaptive and rehabilitative 
devices for people with disabilities -in most cases the systems and 
applications are designed to perform one specific function or assist 
someone with a specific form of disability.
'What I would call the "old" AT-market is dominated by isolated 
applications and devices, each addressing a specific disability or 
focusing on a specific ability of the user. This is in principle good, 
since it means that each device can be brilliantly optimised in its 
functionality,' explains Stefan Parker, a project coordinator and 
researcher at KI-I in Austria. 'The trouble is that in most actual use 
cases these devices only manage to take advantage of a part of the 
user's abilities or, in other cases, are not properly adaptable to the 
user's needs, leaving him or her with a device that is merely 
semi-optimal for their use case.'
The problem is that disabilities cannot be categorised. Every person
 is different and even two people suffering from the same disease will 
often have very different degrees and types of impairment, or a 
combination of different disabilities at the same time. And an 
individual sufferer will usually need systems to be adjusted, or new 
devices to be used, as their symptoms evolve over time.
In order to address the issue, a consortium of research institutes, 
universities and private companies from seven countries have developed 
an affordable and scalable platform to implement AT in a much more 
personalised and flexible way. Their system, developed over two years in
 the 'Assistive technology rapid integration and construction set' 
(ASTERICS) project with the support of EUR 2.65 million in funding from 
the European Commission, has already gone into commercial production. 
And on-going research is set to enhance it further.
Assistive systems, centred on the user
'The AT market is currently subject to great change. On the one 
hand, mobile devices like smart phones and tablet PCs are conquering the
 world, and this has a great influence on the AT market. On the other 
hand, more user-centred and more flexible approaches towards AT are 
being generated - ASTERICS being the first and therefore most 
important,' says Mr Parker, who helped coordinate the project.
Unlike traditional AT systems, the ASTERICS platform can be 
configured to meet the specific needs of individual users. It is 
possible to choose from a wide variety of sensors, from simple switches 
or webcams to advanced 'brain-computer interfaces' (BCI), for 
interaction with the system depending on the requirements and abilities 
of each person.
The input data, no matter how it is generated, is processed by the 
'ASTERICS Runtime Environment' (ARE). The software can easily be 
installed on a Windows-based machine and uses so-called 'models', 
configured for each user, to process and execute user commands on any 
device in order to use their smart phone or computer, and to control 
their air conditioning or open a window in their home.
The models are built and configured via a dedicated configuration 
programme, the 'ASTERICS Configuration Suite' (ACS) in which, through a 
graphical interface, it is possible to combine several plug-ins for 
input, signal processing and output and connect them via data-channels 
and event-channels. Once completed, a model is simply uploaded to the 
ARE, where several models can be stored, so the user can have different 
options for different use cases.
There are also extension modules for the connection of sensors, 
which can be connected either to the platform or to any other computer 
via a standard USB cable, along with a HID actuator - a small 
USB-interface that acts like a standard wireless plug-and-play device, 
emulating mouse, keyboard or joystick.
'The approach results in a completely user-centred on-site 
development of AT - the user no longer needs to adapt to the device, 
it's the other way round. This goes so far that users can even make 
small adaptations themselves, or their carer can make them for them, to 
react to changes in the daily situation,' Mr Parker notes. 'Also the 
system can be adapted every time a user's condition changes for better 
or worse - users no longer need to buy a new device every time their 
condition changes - or use the old one despite having a hard time doing 
so - they can continue to use the system they are accustomed to and 
like, but with a new means of input or just with refined settings.'
People suffering from motor disabilities, as well as specialised 
carers and AT experts, were consulted by the ASTERICS team throughout 
the design and development process, and prototype platforms received 
overwhelmingly positive feedback in trials.
'ASTERICS was really appreciated by users and during the course of 
the user tests we were able to give possibilities to people that they 
wouldn't have had without the system. Some users have continued to use 
the ASTERICS system since the user tests and are very happy with it,' Mr
 Parker says.
Crucially, the system is relatively cheap to install, and can make 
use of users' existing devices, such as the webcam on their laptop, to 
reduce costs further. Mr Parker estimates that most people would need to
 spend around EUR 500, excluding the cost of buying a laptop or home PC,
 for a suitable set up, though it could run to several thousand euro if 
more expensive equipment such as a brain-computer interface is required.
IMA, a project partner based in the Czech Republic, is currently 
producing commercial hardware, including input/output modules for use 
with the system, while Harpo in Poland, another partner, is the prime 
distributor of the complete system and provides adaptation and 
customisation services.
The team's goal now is to continue their research and launch a 
follow-up project to extend the system to mobile devices such as smart 
phones and tablets.
ASTERICS received research funding under the European Union's Seventh Framework Programme (FP7).
Link to project on CORDIS:
- FP7 on CORDIS
- ASTERICS project factsheet on CORDIS
Link to project's website:
- 'Assistive technology rapid integration and construction set' website
Links to related videos/audios:
- ASTERICS project videos
Other links:
- European Commission's Digital Agenda website
 EN
EN  CS
CS DE
DE ES
ES FR
FR HU
HU IT
IT PL
PL PT
PT РУ
РУ SK
SK TR
TR УК
УК AR
AR 中文
中文






















